SX4 4WD L4-2.0L (2008)
6. Install brake pads and caliper.
7. Connect flexible hose (4) with new washers (5) to caliper and brake pipe temporarily by hand. Then install clip (2).
8. Tighten flexible hose joint bolt (3) and brake pipe flare nut (1).
WARNING: Make sure that flexible hose is not twisted when tightening joint bolt. If it is twisted, reconnect it using care not to twist it.
Tightening torque
Flexible hose joint bolt a: 23 Nm (2.3 kgf-m, 17.0 ft. lbs.)
Brake pipe flare nut b: 16 Nm (1.6 kgf-m, 12.0 ft. lbs.)
