SX4 4WD L4-2.0L (2008)
Yaw Rate Sensor: Component Tests and General Diagnostics
G Sensor Inspection (4WD Model)
Connect positive cable of 12 V battery to "A" terminal of sensor and ground cable to "C" terminal.
Then using voltmeter, check voltage between terminals "B" and "C".
If measured voltage is not as specified, replace G sensor.
G sensor specification
When placed horizontally: 2 - 3 V
When placed upright with arrow upward: 3 - 4 V
When placed upright with arrow downward: 1 - 2 V
