SX4 4WD L4-2.0L (2008)
10. Connect connector to temperature control actuator.
11. Set temperature selector of HVAC control module to "MAX COOL" position with ignition switch turned ON, and make sure if the position of
actuator lever is "MAX COOL" position (B).
12. Turn ignition switch to OFF position, and then disconnect connector from temperature control actuator.
13. Measure resistance between terminal "1" and "2".
Temperature control actuator resistance between terminal "1" and "2" (MAX COOL position) (Reference value)
Approx. 4.3 kohms at 25 °C (77 °F)
If measure resistance is out of specification, replace the actuator with new one.