SX4 4WD L4-2.0L (2008)
Reverse removal procedure noting the following instructions.
^
Replenish specified amount of compressor oil to compressor suction side referring to "Replenishing Compressor Oil" in Operation Procedure for
Refrigerant Charge:Manual Type.
^
Install the padding (1) to the installation hole uniformly.
^
Evacuate and charge the A/C system referring to "Evacuation" and "Charge" in Operation Procedure for Refrigerant Charge:Manual Type.
^
Refill cooling system with coolant referring to Cooling System Flush and Refill.
^
Adjust control cables referring to HVAC Control Unit Removal and Installation. (vehicle with manual type A/C)