SX4 4WD L4-2.0L (2008)
Refrigerant Pressure Sensor / Switch: Service and Repair
A/C Refrigerant Pressure Sensor Removal and Installation
A/C Refrigerant Pressure Sensor Removal and Installation
Removal
1. Recover refrigerant from the A/C system with the recovery and recycling equipment referring to "Recovery" in Operation Procedure for
Refrigerant Charge:Manual Type.
2. Disconnect negative (-) cable from battery.
3. Disconnect A/C refrigerant pressure sensor connector.
4. Remove A/C refrigerant pressure sensor (1) from liquid pipe (2).
Installation
Reference: A/C Refrigerant Pressure Sensor and Its Circuit Inspection:Manual Type
Reverse removal procedure noting the following instructions.
^
Apply compressor oil to O-ring of A/C refrigerant pressure sensor.
^
Tighten A/C refrigerant pressure sensor to specified torque.
