SX4 4WD L4-2.0L (2008)
Headlamp Relay: Testing and Inspection
TAIL LIGHT RELAY, HEADLIGHT RELAY, FRONT FOG LIGHT RELAY INSPECTION
1. Remove tail light relay (1), headlight low beam relay (2), headlight high beam relay (3) and/or front fog light relay (4).
2. Check that there is no continuity between terminal "3" and "4". If there is continuity, replace relay.
3. Connect battery positive (+) terminal to terminal "2" of relay.
4. Connect battery negative (-) terminal to terminal "1" of relay.