SX4 4WD L4-2.0L (2008)
3. Remove sleeve lock nut (1) from side air bag (inflator) module (2).
4. Remove side-air bag (inflator) module from seat back.
5. Disconnect side-air bag (inflator) module connector (1) as shown in the figure.
a. Unlock lock button (2).
b. With lock button unlocked, disconnect connector.
WARNING:
-
When carrying a live air bag (inflator) module, make sure the bag opening is pointed away from you. Never carry air bag
(inflator) module by wires or connector on the side of the module. In case of an accidental deployment, the bag will then deploy