SX4 4WD L4-2.0L (2008)
WARNING:
^
For handling and storage of seat belt pretensioner, select place where ambient temperature is below 65 °C (150 °F), without high
humidity and away from electric noise.
^
Never carry seat belt pretensioner by webbing.
^
When placing seat belt pretensioner on workbench or other surface, be sure to lay it with its exhaust hole (1) side facing up. It is also
prohibited to put something on seat belt pretensioner. Otherwise, personal injury may result.
6. Set air bag (inflator) module or seat belt pretensioner as follows.
^
For driver air bag (inflator) module
a. Clear space (3) on ground about 185 cm (6 ft) in diameter where driver air bag (inflator) module (1) is set for deployment. Paved, outdoor
location where there is no activity is preferred. If outdoor location is not available, use space on shop floor where there is no activity and
sufficient ventilation is provided. Ensure no loose or flammable object exists within deployment area.
b. Place driver air bag (inflator) module (1) with its vinyl trim cover facing up (2) on ground in Step a.
