SX4 4WD L4-2.0L (2008)
Fuel Level Sensor: Service and Repair
Main Fuel Level Sensor Removal and Installation
CAUTION:
^
Do not touch resister plate (1) and deform arm (2). It may cause main fuel level sensor to fail.
^
Be very careful not to cause damage to fuel tube installed section (sealed section in bore). If it be damaged, replace it with new one, or fuel
will leak from the part.
Removal
1. Remove fuel pump assembly from fuel tank referring to Fuel Pump Assembly Removal and Installation.
2. Disconnect main fuel level sensor connector (3).
