SX4 4WD L4-2.0L (2008)
4. Install steering gear case to suspension frame (3) as follows.
a) Set member bracket (2) to steering gear case (1).
b) Install all steering gear case mounting bolts by hand.
c) Tighten steering mounting bolts in numerical order and specified torque.
Tightening torque
Steering gear case mounting bolt a: 70 Nm (7.0 kgf-m, 51.0 ft. lbs.)
5. Install front suspension frame with steering gear case to vehicle.
6. Connect high pressure pipe (1) and return hose (2) to specified torque.
