SX4 4WD L4-2.0L (2008)
strut assembly.
Removal
1. Remove hood rear seal (1), and then remove cowl top garnish (2) from vehicle.
NOTE: When servicing component parts of strut assembly, beforehand loosen strut nut a little before removing strut assembly. This will make
service work easier. Note that the nut must not be removed at this point.
2. Hoist vehicle, allowing front suspension to hang free.
3. Remove wheel and disconnect stabilizer joint (1) from strut bracket. When loosening joint nut, hold stud with hexagon wrench (2).