SX4 4WD L4-2.0L (2008)
Shifter A/T: Testing and Inspection
Select Lever Inspection
Check select lever for smooth and clear-cut movement individually. If a malfunction is found, replace select lever assembly.
"3" Position Switch Inspection
1. Remove console box.
2. Disconnect "3" position switch connector (1).
3. Check continuity between "3" position switch terminals.
If check result is not as satisfied, replace.
"3" position switch specification
Shift selector lever to "3" or "2" range: Continuity
Shift other above range: No continuity