Verona L6-2.5L (2005)
11. Remove the cable.
Fuel Filler Door Remote Handle and Cable Installation
1. Feed the cable from the luggage compartment to the passenger compartment.
2. Install the floor carpet to its original position.
3. Install the left side front and rear rocker panels, the left side kick panel, and the left side lower B-pillar trim panel. Refer to Front Rocker Trim
Panel Installation, Rear Rocker Trim Panel Installation, Kick Panel Installation and Lower B-Pillar Trim Panel Installation.
4. Install the driver's side seat and the rear seats. Refer to Front Bucket Seat Installation, Rear Seat Cushion Installation and Split Rear Seatback
Installation.
5. Connect the cable to the handle.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
6. Install the fuel filler door remote cable handle with the screws.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
Tighten:
Tighten the fuel filler door remote cable handle screws to 10 N.m (89 lb.in).
7. Install the fuel filler door remote cable handle cover with the screw.
Tighten:
Tighten the fuel filler door remote cable handle cover screw to 3 N.m (27 lb.in).