Verona L6-2.5L (2005)
16. Install the engine mount bracket support.
Tighten the engine mount bracket support bolts to 25 - 31 Nm (18 - 23 ft. lbs.).
17. Install the crankshaft pulley. Tighten the crankshaft pulley bolt using the crankshaft pulley holder DW110-130-01 and the crankshaft pulley
installer/remover DW110-130-02.
CAUTION: Very high torque is required to remove or to install the crankshaft pulley. Never remove the crankshaft pulley when the vehicle is
hung on the lift.
Tighten the crankshaft pulley bolt to 500 - 600 Nm (369 - 443 ft. lbs.).