Verona L6-2.5L (2005)
6. Install the nut at the compressor hose connecting block.
Tighten:
Tighten the compressor hose connecting block nut to 38 N.m (28 lb.ft).
7. Install the bolt and the nut which secure the clamp that hold the high pressure pipe to the vehicle.
8. Connect the electrical connector to the pressure transducer.
9. Install the surge tank. Refer to Surge Tank Installation.
10. Connect the negative battery cable.
11. Evacuate and recharge the A/C system. Refer to Discharging, Adding Oil, Evacuating, and Charging Procedures for A/C System.