Verona L6-2.5L (2005)
2. Install the exhaust EGR pipe.
Tighten:
Tighten the exhaust EGR pipe-to-heater adapter retaining nuts to 8 ~ 12 m (71 ~ 106 lb.in).
Tighten the exhaust pipe bracket-to-cylinder head short side retaining bolt to 18 ~ 22 N.m (13 ~ 16 lb.ft).
Tighten:
Tighten the exhaust EGR pipe flange-to-EGR valve retaining bolts to 8 ~ 12 N.m (71 ~ 106 lb.in).
Tighten the exhaust pipe bracket-to-cylinder head long side retaining bolt to 8 ~ 12 N.m (71 ~ 106 lb.in).
