Verona L6-2.5L (2005)
Antenna Control Module: Service and Repair
Glass Antenna Module Removal and Installation
Glass Antenna Module Removal
1. Disconnect the negative battery cable.
2. Remove the C-pillar trim panel. Refer to C-Pillar Trim Panel Removal.
3. Disconnect the electrical connector.
4. Remove the screws and the glass antenna module.
Glass Antenna Module Installation
1. Install the glass antenna module with the screws.
2. Connect the electrical connectors.
3. Install the C-pillar trim panel. Refer to C-Pillar Trim Panel Installation.
4. Connect the negative battery cable.