Verona L6-2.5L (2005)
Power Steering Pump: Service and Repair
P/S Pump Assembly Removal and Installation
P/S Pump Assembly
Removal
1. Remove the serpentine accessory drive belt.
2. Position a drain pan to catch the power steering fluid that will drain from the high-pressure hose after it is disconnected from the power steering
pump.
3. Disconnect the high-pressure hose and the supply hose from the power steering pump.
4. Remove the bolt from the front right side of the power steering pump. Loosen the rear right bolt and swing the bracket out of the way.