Vitara 4WD L4-2.0L (2003)
Front Door Panel: Service and Repair
Front Door Trim Panel Removal and Installation
1. Remove inside handle bezel (1).
2. Remove door mirror bezel.
3. Remove inside lock knob and door in side pull handle case fitting screw.
4. Remove window regulator handle (if equipped). To remove regulator handle, pull off snap ring by using a cloth as shown in figure.
5. Remove door trim.
With inside handle bezel tilted as shown in the figure, turn door trim 90 degrees counterclockwise to remove it. And disconnect power window
switch lead wire at coupler (if equipped).
Reverse removal procedure to install Door Trim Panel.