Vitara JLS (2Dr) 2WD L4-2.0L (2001)
_2wd/l4-2.0l/Page-352002.png)
^
Install engine block heater in the direction as shown in the figure.
^
Apply thread lock cement to block heater bolt (1).
"A": Thread Lock 99000-32020
^
Tighten engine block heater bolt to specified torque.
Tightening torque
Engine block heater bolt (a): 7 Nm (0.7 kg-m, 5.5 ft. lbs.)
^
Use new exhaust manifold gasket.
^
Tighten exhaust manifold bolts and nuts to specified torque.
^
Refill cooling system.
^
Finally, start engine and check for engine coolant leaks and exhaust gas leakage.
