Vitara JLS (2Dr) 2WD L4-2.0L (2001)
Sensing and Diagnostic Module: Service Precautions
HANDLING AND STORAGE SDM
WARNING: Never power up air bag system when SDM is not rigidly attached to the vehicle. Otherwise, personal injury may result.
CAUTION: After detecting one time of such collision as to meet deployment conditions, the SDM must not be used.
Refer to "Diagnosis" when checking the SDM.
-
Never attempt disassembly of SDM.
-
When storing SDM, select a place where neither high temperature nor high humidity is anticipated and oil, water and dust are kept off.
-
If SDM was dropped from a height of 90 cm (3 ft) or more or if it is found to be damaged or deformed, replace it with a new one.
-
If installation part of SDM was damaged, repair that part completely before reinstallation.
-
All SDM fasteners must be carefully torqued and the arrow must be pointed toward the front of the vehicle to ensure proper operation of the air
bag system.