suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Relays and Modules - Transmission and Drivetrain > < Sensing and Diagnostic Module <--> [Air Bag Control Module]|Locations|Page 230
Page 3
background image

6. Install center garnish panel (2).
7. Install front and rear center console box (1).
8. Connect negative cable to battery.
9. Enable air bag system. Refer to "ENABLING AIR BAG SYSTEM".
7. Remove SDM from vehicle.

Relays and Modules - Transmission and Drivetrain > < Sensing and Diagnostic Module <--> [Air Bag Control Module]|Locations|Page 230