Vitara JLS (2Dr) 2WD L4-2.0L (2001)
Reverse removal sequence to install knuckle, wheel spindle oil seal and drive shaft bearing, noting the following points.
-
For 4WD vehicle
Install drive shaft bearing by using special tool.
Special tool (A): 09913-80112
Drive shaft bearing installing position (Depth "a") 1.75 - 2.50 mm (0.069 - 0.098 inch)
-
When installing wheel spindle to knuckle, coat their mating surfaces with sealant "A".
"A": Sealant 99000-31110
-
For 4WD vehicle
Also, fill recess in wheel spindle with about 10 g lithium grease "B".
"B": Grease 99000-25010