Vitara JLS (4Dr) 2WD L4-2.0L (2000)
2. Install CMP sensor to camshaft.
Fit the dog of CMP sensor coupling into the slots of camshaft, when installing. The dogs of CMP sensor coupling are offset. Therefore, if the dogs
can not be fitted into the slots, turn the CMP sensor shaft by 180 degree and try again.
3. Tighten CMP sensor bolts.
Tightening Torque
(a):15 Nm (1.5 kg.m, 11.0 lb.ft)
4. Connect CMP sensor coupler.