Vitara JLS (4Dr) 2WD L4-2.0L (2000)
SDM
Check for external damage such as deformation, scratch, crack, peeled paint, etc.
Check that SDM cannot be installed properly due to a cause in itself. (There is a gap between SDM and its mounting part, or it cannot be fixed securely.)
Check that connector or lead wire of SDM has a scorching, melting or damage.
Check that connector is connected securely or locked.
Check SDM connector and terminals for tightness.
Check SDM sets a diagnostic trouble code and the diagnostic table leads to a malfunctioning SDM.
If any faulty condition is found in above checks, replace.
Air bag wire harness and connections
Check for damages, deformities or poor connections. (Refer to "Intermittent And Poor Connections".) See: Air Bag Systems/Testing and
Inspection/Component Tests and General Diagnostics/Intermittent and Poor Connections
Check wire harness clamps for tightness. If any faulty condition is found, correct or replace.
Seat belts and mounting points