Vitara JLS (4Dr) 2WD L4-2.0L (2000)
_2wd/l4-2.0l/Page-960011.png)
11. Install rectifier.
CAUTION: When installing rectifier, check to confirm that stator leads have enough clearance with cooling fan blades.
Tightening Torque
(a): 2.0 N.m (0.2 kg.m, 1.5 lb.ft)
(b): 3.9 N.m (0.39 kg.m, 3.0 lb.ft)
12. Install brush holder cover to brush holder.
13. Place the IC regulator together with the brush holder horizontally on the rear end frame.
14. Install the 5 screws until there is a clearance of approx. 1 mm (0.04 in.) between the brush holder and connector.
Tightening Torque
(a): 2.0 N.m (0.2 kg.m, 1.5 lb.ft)