Vitara JLS (4Dr) 2WD L4-2.0L (2000)
^
For 4WD vehicle
Install drive shaft bearing by using special tool.
Special Tool
(A): 09913-76010 (With H25 engine)
(A): 09913-80112 (With G16 or J20 engine)
Dimension "a": 0-1 mm (0-0.04 inch) (With H25 engine)
Dimension "a": 1.75-2.50 mm (0.069-0.098 inch) (With G16 or J20 engine)
^
When installing wheel spindle to knuckle, coat their mating surfaces with sealant.
"A": Sealant 99000-31110
^
For 4WD vehicle
Also, fill recess in wheel spindle with about 10 g lithium grease.
"B": Grease 99000-25010
^
Tighten wheel spindle nut to specified torque.
Tightening Torque (a): 50 Nm (5.0 kg-m, 36.5 ft. lbs.)
^
For 4WD vehicle
Press-fitting inner oil seal.
Drive in inner oil seal until its end contacts stepped surface of knuckle using special tools.
Special Tool