Vitara JLS (4Dr) 2WD L4-2.0L (2000)
NOTE: Amount of grease applied to hollow in oil seal should be more than 60% of its vacant space.
"A": Grease 99000-25010
7. Install sensor rotor as shown (if equipped with ABS).
NOTE:
-
Pipe used here should have inner diameter of 100 mm (3.94 inch.) - 106 mm (4.17 inch) and its outside should not contact teeth of sensor
rotor.
-
Use care not to insert wheel hub diagonally.
8. Install wheel hub complete with bearings and oil seals onto front wheel spindle.
9. Install bearing washer.
10. Tighten wheel bearing lock nut to specified torque while turning wheel hub by hand.
Special Tool
(A): 09951-16050
Tightening Torque (a): 216 Nm (21.6 kg-m, 157 ft. lbs.)