Vitara JLS (4Dr) 2WD L4-2.0L (2000)
12. Install LSPV stay to axle housing, tighten LSPV stay bolt to specified torque. And adjust LSPV referring to Brakes and Traction Control.
Tightening Torque (c): 23 Nm (2.3 kg-m, 17.0 ft. lbs.)
13. Connect brake pipe to brake flexible hose and tighten brake pipe flare nut to specified torque.
Tightening Torque (d): 16 Nm (1.6 kg-m, 11.5 ft. lbs.)
14. Clean mating surface of axle housing (right & left) and brake back plate, then apply sealant as shown.
"A": Sealant 99000-31110
15. Apply grease to axle shaft inner oil seal lip as shown.
"A": Grease 99000-25010