Vitara JLS (4Dr) 2WD L4-2.0L (2000)
(D): 09944-68210
(E): 09924-74510
3. Install front wheel bearing.
NOTE:
-
As front wheel bearing is cassette type double taper roller bearing, it must be replaced as whole unit when replacement becomes necessary.
-
Cassette type double taper roller bearing is so designed as to provide proper pre-load as long as it is tightened to specified torque. Therefore, it
requires no pre-load check after installation, unlike conventional taper roller bearing.
-
Apply wheel bearing grease between bearings.
"A": Grease 99000-25010
4. Install bearing circlip.
5. Drive in oil seals by using special tools.
Special Tool
(F): 09944-66010
(G): 09924-74510
6. Apply lithium grease to lip portion and hollow of oil seal.