Vitara JS (2Dr) 2WD L4-1.6L DOHC MFI (1999)
Brake Rotor/Disc: Service and Repair
REMOVAL
1) Hoist vehicle and remove wheel.
2) Remove caliper assembly by loosening carrier bolts (2 pcs).
CAUTION: During removal, be careful not to damage brake flexible hose and not to depress brake pedal.
3) Remove disc by using 8 mm bolts (2 pcs).
INSPECTION
Refer to Brake Pad; Service and Repair.
INSTALLATION
NOTE: See NOTE at the beginning of this section.
1) Install disc to wheel hub.
2) Install caliper assembly to steering knuckle.
3) Torque caliper carrier bolts to specification.
Tightening Torque (a): 85 Nm (8.5 kg-m, 61.5 ft. lbs.)