Vitara JX (2Dr) 4WD L4-1.6L DOHC MFI (1999)
_4wd/l4-1.6l_dohc_mfi/Page-1528001.png)
Cruise Control Switch: Testing and Inspection
Cruise Main Switch
1. Disconnect battery negative cable from battery.
2. Disconnect connector from cruise main switch.
3. Remove cruise main switch from instrument panel.
4. Check for resistance between "IG" and "LOAD" terminals.
Switch button released : Infinity
Switch button pressed : About 3.9 k ohms
If check result is not satisfactory, replace.
5. Install cruise main switch to instrument panel and connect connector securely.
