Vitara JX (4Dr) 4WD L4-2.0L (2000)
8. Remove brake back plate from rear axle shaft.
INSTALLATION
1. Apply sealant to mating surface of bearing retainer with brake back plate.
"A": Sealant 99000-31110
NOTE: Make sure to remove old sealant before applying it anew.
2. Install brake back plate to rear axle shaft.
3. Apply sealant to joint seam of rear axle housing and brake back plate.
"A": Sealant 99000-31110
NOTE: Make sure to remove old sealant before applying it anew.