X-90 (2WD) L4-1591cc 1.6L SOHC MFI (1997)
Tightening Torque:
(a): 11 Nm (1.1 kg-m, 8.0 ft. lbs.).
(b): 25 Nm (2.5 kg-m, 18.0 ft. lbs.).
7. Install timing belt outside cover. Before installing, make sure that seal is between water pump and oil pump case.
Tightening Torque (a): 11 Nm (1.1 kg-m, 8.0 ft. lbs.).
8. Install crankshaft pulley. Fit keyway of pulley to key on crank timing belt pulley, and tighten five bolts to specified torque.
Tightening Torque (a): 16 Nm (1.6 kg-m, 11.5 ft. lbs.).
9. Install radiator fan shroud, water pump pulley, cooling fan and water pump drive belt. Adjust water pump drive belt tension, referring to "ENGINE
COOLING" section.
10. Install power steering pump belt or A/C compressor belt, if equipped. Adjust its belt tension,