X-90 (2WD) L4-1591cc 1.6L SOHC MFI (1997)
3. Aligning clutch disc to flywheel center by using Special Tools (A) 09924-17810 and (C) 09923-36330, install clutch cover (3) and bolts. Then
tighten bolts to (b) 23 Nm (17.0 ft. lbs.)
NOTE:
-
While tightening clutch cover bolts, compress clutch disc with Special Tool (clutch center guide) by hand so that disc is centered.
-
Tighten cover bolts little by little evenly in diagonal order.
4. Slightly apply grease "A" to input shaft, then join transmission transfer assembly with engine.
NOTE: Turn crankshaft with wrench from front while inserting transmission input shaft to clutch disc until splices mesh.