X-90 (2WD) L4-1591cc 1.6L SOHC MFI (1997)
11. Press-fit bearing (1) with Special Tool (B) 09925-18010 and fit small circlip.
12. Fit small circlip (1), using Special Tool (D) 09951-16080, fit speedometer drive gear (2) and then fit the other small circlip.
13. Fit sleeve (1) to high speed hub (2), place 3 synchronizer keys (3) and set synchronizer springs (4) as shown. Neither sleeve nor key has specific
installing direction.
14. Install needle bearing, 3rd gear (3) and 3rd synchronizer ring (2). Then using Special Tool (E) 09913-84510 and press, press-fit high speed sleeve
and hub assembly (1) onto shaft.
15. Fit large circlip.
16. Install needle bearing.