X-90 (4WD) L4-1591cc 1.6L SOHC MFI (1998)
Brake Master Cylinder: Adjustments
PUSH ROD CLEVIS ADJUSTMENT
Install push rod clevis so that measurement "a" is obtained and torque nut (a) to 26 Nm (19.0 ft. lbs.) and length "a" to 126.1 - 127.1 mm (4.96 - 5.00
inch.)
BOOSTER PISTON ROD AND MASTER CYLINDER PISTON ADJUSTMENT
The length of the booster piston rod is adjusted to provide specified clearance "a" between piston rod end and master cylinder piston. Before
measuring clearance, push piston rod several times so as to make sure reaction disc is in place. Keep inside of booster at atmospheric pressure for
measurement.
1. Set special tool No. 09950-96010 (A) on master cylinder and push pin until contacts piston.
2. Turn special No. 09950-96010 tool upside down and place it on booster. Adjust booster piston rod length until rod end contacts pin head.