X-90 (4WD) L4-1591cc 1.6L SOHC MFI (1998)
/l4-1591cc_1.6l_sohc_mfi/Page-732006.png)
11. Connect brake flexible hose to bracket on axle housing and secure it with E-ring.
12. Connect brake pipe to brake flexible hose and tighten brake pipe flare nut to specified torque.
Tightening Torque (d): 16 Nm (11.5 ft. lbs.)
13. Clean mating surface of axle housing (right & left) with brake back plate and apply sealant as shown.
"A": Sealant 99000-31110 or equivalent.
14. Apply grease to axle shaft inner oil seal lip as shown.
"A": Grease 99000-25010 or equivalent.
