X-90 (4WD) L4-1591cc 1.6L SOHC MFI (1998)
Wheel Hub: Description and Operation
Manual Free Wheeling Hub
OPERATION
A free wheeling hub should be fitted onto each of the right and left front wheel hubs. The free wheeling hub has a knob and two embossed marks,
"FREE" and "LOCK". When the knob is set to the "FREE" position, the axle shaft and wheel are disconnected and the revolution of the front
wheels becomes free. When it is set to the "LOCK" position, the axle and wheel are connected.
For their usage, refer to Owner's Manual supplied with the vehicle.
CAUTION: Both of the right and left wheeling hub knobs must be set to the same position (either FREE or LOCK). Don't set one to "FREE" and
the other to "LOCK" positions.