XL-7 2WD V6-3.6L (2007)
1. Align the front door window regulator motor assembly to the front door window regulator.
CAUTION: Refer to [Fastener Notice] in Cautions and Notices.
2. Install the front door window regulator motor to regulator screws.
Tightening torque
Tighten the front door window regulator motor to door screws to 8 N.m (71 lb.in).
3. Connect the electrical connector to the front door window regulator motor.
4. Install the water deflector.
5. Install the front door trim panel.