XL-7 2WD V6-3.6L (2007)
1. Install the window regulator module into the door.
2. Connect the door harness at the door jamb.
CAUTION: Refer to [Fastener Notice] in Cautions and Notices.
3. Install the 3 latch bolts to the door shut face.
Tightening torque
Tighten the bolts to 10 N.m (89 lb in).
4. Install the 4 module bolts.
Tightening torque
Tighten the bolts to 8 N.m (71 lb in).
5. Connect the 4 electrical connector rosebuds (2 at the mirror and 2 under the speaker).
6. Connect the mirror electrical connector.
7. Install the front door lower speaker.
8. Install the front door window run channel assembly.
9. Install the front door outside handle.