XL-7 2WD V6-3.6L (2007)
Rear Door Window Regulator: Service and Repair
Rear Side Door Window Regulator Replacement
Removal Procedure
1. Remove the rear door outside handle.
2. Remove the rear door window run channel assembly.
3. Remove the rear door lower speaker.
4. Disconnect the electrical connector rosebuds.
5. Loosen the 2 rear module bolts.
6. Remove the 4 remaining module bolts.
7. Remove the 3 latch bolts from the door shut face.
8. Disconnect the door harness at the door jamb.
9. Remove the window regulator module from the door.
Installation Procedure