XL-7 2WD V6-3.6L (2007)
2. Remove the liftgate trim.
3. Disconnect the electrical connectors from the liftgate window defogger bus bar.
WARNING: Refer to [Defroster Outlet Caution].
4. Cover the following parts to protect from broken glass:
^
Upper dash pad
^
Defroster outlets and A/C outlets
^
Seats and carpeting
WARNING: Refer to [Glass and Sheet Metal Handling Caution].
NOTE: Keep the cutting edge of the tool against the window.
5. Remove the liftgate window from the urethane adhesive.
^
Leave a base of urethane approximately 2 mm (0.078 in) on the pinch-weld flange.
^
The only suitable lubrication is clear water.
^
Use J 24402-A, J 39032 or equivalent in order to remove the window.
6. With the aid of an assistant, remove the window from the vehicle.
Installation Procedure
1. Install the liftgate window into the opening.
2. Connect the liftgate window defogger electrical connectors to the bus bar.
3. Install the liftgate trim.
4. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
5. Close the liftgate.
