XL-7 2WD V6-3.6L (2007)
1. Position the reinforcement (1) to the vehicle.
2. Loosely install NEW rear frame to body bolts (2).
3. Loosely install the reinforcement bolts (3).
CAUTION: Refer to [Fastener Notice].
4. Tighten the reinforcement bolts (3).
Tightening torque
Tighten the bolts to 50 N.m (37 lb ft).
5. Tighten the frame to body bolts (2).
Tightening torque
Tighten the bolts to 155 N.m (114 lb ft).
6. Remove the utility stand from the frame.
7. Lower the vehicle.