XL-7 2WD V6-3.6L (2007)
Front Subframe Mount: Service and Repair
Front Frame Cushion or Insulator Replacement
Special Tool
CH-47672 Frame Insulator Remover/Installer
Removal Procedure
1. Remove the frame from the vehicle. Refer to [Frame Replacement].
2. Install the CH-47672 to the frame insulator that you are removing as shown.
3. Use the CH-47672 to remove the frame insulator from the frame.
Installation Procedure
1. Clean the frame insulator opening.
NOTE: The frame insulator tabs should be aligned horizontally or left to right on the vehicle and the recessed area should be aligned vertically or
front to back on the vehicle.