XL-7 2WD V6-3.6L (2007)
Keyless Entry Transmitter Battery: Service and Repair
Transmitter Battery Replacement
CAUTION:
^
Use of the wrong battery size may damage the transmitter.
^
When removing the battery, use care not to touch any of the circuitry. Static from your body transferred to these surfaces may damage
the transmitter.
NOTE: If the transmitter won't work, perform the RKE System Check before replacing the battery. Also, before replacing the battery in the transmitter,
make sure that the battery is touching both the negative and positive contacts inside of the transmitter.
For battery replacement, use a Panasonic type CR2032 3-volt battery, or equivalent.
1. Use a small coin, or flat-head screwdriver, to separate the bottom of the transmitter from the top.
CAUTION: Do not use sharp objects to help slide the battery out of the clip. This may result I in damage to the circuit board.
2. Remove the circuit board from the transmitter housing and key pad by pressing on the LOCK button.