XL-7 2WD V6-3.6L (2007)
1. Install the window run channel seal assembly.
a. Place the seal assembly into the door frame.
b. Place the seal assembly on the door header.
c. Install the seal to the door header flange, starting from the front corner.
CAUTION: Refer to [Fastener Notice].
2. Install the screw to the upper corner.
Tightening torque
Tighten the nuts to 6 N.m (53 lb in).
3. Install the bolts to the left and right sides.
Tightening torque
Tighten the nuts to 10 N.m (89 lb in).
4. Install the rear door window weatherstrip run channel assembly.
5. Install the rear door window.
