XL-7 2WD V6-3.6L (2007)
1. Remove the caps or plugs from the opening in the brake caliper and the brake hose.
NOTE:
Install NEW copper brake hose gaskets.
2. Assemble the NEW copper brake hose gaskets, and the brake hose bolt, to the brake hose.
CAUTION:
Refer to [Fastener Notice].
3. Install the brake hose fitting bolt to the brake caliper.
Tightening torque
Tighten the bolt to 52 Nm (38 lb ft).
4. Install the front brake hose bracket retaining bolt.
Tightening torque
Tighten the bolt to 12 Nm (106 lb in).