XL-7 2WD V6-3.6L (2007)
Parking Brake Cable: Service and Repair
Parking Brake Rear Cable Replacement
Parking Brake Rear Cable Replacement
Removal Procedure
Special Tool
^
J 37043 Park Brake Cable Release Tool
1. Remove the front floor console.
2. Ensure the park brake lever is in the fully released position.
3. Release the tension from the park brake cable system at the front cable adjusting nut (1).
Using only hand tools, loosen the adjusting nut (1) completely to the end of the front cable threaded rod.
4. Remove the rear carpet retainers.
5. Position the carpet forward in order to access the rear park brake cables and body pass through grommets.
6. With the park brake lever (1) in the released position, release the appropriate rear park brake cable (2) from the cable equalizer.
7. Release the rear cable fitting from the park brake lever bracket and remove the cable from the lever assembly.