XL-7 2WD V6-3.6L (2007)
Parking Brake Lever: Service and Repair
Park Brake Lever Assembly Replacement
Removal Procedure
1. Disable the supplemental inflatable restraint (SIR) system.
2. Remove the front floor console.
3. Ensure that the park brake lever is in the fully released position.
4. Release the tension from the park brake cable system at the front cable adjusting nut (1).
5. Using ONLY hand tools, loosen the adjusting nut (1) completely to the end of the front cable threaded rod.
6. Disconnect the electrical connector from the park brake warning lamp switch.
